post a free press release
post a free press release post a free press release post a free press release post a free press release post a free press release post a free press release
post a free press release

Innovative mass finishing process increases the efficiency of turbines

Specially selected grinding media improve the airflow characteristics of blades.

At the ALUMINIUM 2018 exhibition Walther Trowal presents its new process for the gentle surface finishing of guide vanes used in turbines and compressors. It creates very smooth surface readings and, thus, optimizes the airflow through the guide vanes.

After they have been milled from a cast block of aluminium, guide vanes for turbines or compressors require a very smooth surface to insure optimum airflow around every single blade. To date this required a complex and costly mechanical process.

Walther Trowal has recently developed a method that allows the gentle smoothing of the guide vanes after milling without rounding the leading edges beyond the acceptable tolerances - an important factor for increasing the efficiency of jet engines.

Basis for the new process are the rotary multi vibrators of the model range MV allowing the processing of guide vanes with diameters of up to 800 mm. The company utilizes special, extremely small ceramic grinding media, which provide not only optimum surface coverage on the work pieces but also smoothens the surface at the root of the vanes.

The guide vanes, but also blisks, are mounted to a fixture that is magnetically attached to the base of the processing bowl. This ensures that the overlapping, high-frequency vibrations from the multi vibrator are transferred to the work piece, causing intensive contact between the media and the vane surface areas.

The result of the fully automatic finishing process: The milling lines from the preceding machining step have been ground out creating a very smooth surface. With the new process Walther Trowal reduces the Ra surface readings from 4.0 down to 1.0 µm with only minimal rounding of the leading edges. This innovative mass finishing process creates ideal conditions for an optimum airflow through the guide vanes.

At the ALUMINIUM 2018 Walther Trowal also presents rotary vibrators used for the surface finishing of aluminium castings including the removal of burrs.

Walther Trowal at ALUMINIUM 2018
Düsseldorf, September 18 - 22, 2018
Hall 12, Stand G50

Pressekontakt VIP Kommunikation Regina Reinhardt Dennewartstraße 25-27 52068 Aachen, Germany +49.241.89468-24 +49.241.89468-44 reinhardt@vip-kommunikation.de www.vip-kommunikation.de

Aluminium, Trowal, surface, finishing, turbine, compressor, vibrator

by: Walther Trowal GmbH and Co KG



Previous press releases
Global Usage based Insurance Market 2025
Augmented Reality in Retail and eCommerce Industry to Drive Business Growth
Protect Your Jacksonville Home With The Best Stand
Drive Gates Guarding Your House With A Garage Gate
The Advantages Of Outdoor Privacy Screening A Lot More Than You Can Think
What Things To Consider In Pedestrian Gate Security
Pool Security and Why You Should Choose Glass Pool Fencing
Frameless Glass Provides A Lot More Than Just Luxury
The Security Advantages of Frameless Gates
How To Select A Pool Fence Points
World Nursing and Medicare Summit
Global Beverage Stabilizers Market 2023
Australia Coffee and Tea Capsules Market 2018 2023
Pepperl Fuchs Delta Dealers in Chennai VeepeeControls
Strategies for Digital Marketing to Maintain Online Rank
Strategies for Digital Marketing to Maintain Online Rank
Magnifi Brands a leading Digital Marketing Agency
Cardonio Led by a Team of Experienced Industry Experts
Family Owned Auto Repair Shop Finns Garage Announc
post a free press release
post a free press release